Skip to main content

Write a Review

$8.99 - $10.00 $8.99 - $10.50 Up to 5% Off
The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.
$10.00
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$11.99
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
$12.50
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$12.99
-Molded v-brake pads
$13.00
MSW Seatpost Clamps keep your saddle and seatpost from moving around while you’re out riding. Tough and dependable, they’re available in polished silver or black finishes, as well as four common sizes. - MSW Seatpost Clamp - 34.9mm, Black
$14.95
- Break-Away Quick Disconnect - Two pieces: front derailleur / rear derailleur - Time-saving system for managing derailleur cables on Break-Away bikes - Light, threaded, alloy barrels with rubber noise dampener
$14.99
Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. • Ready to use with no water rinsing required • Safe for use on all surfaces and paint finishes • 100% readily biodegradable and non-toxic • State of the art cleaning agents remove dirt and grime • Superior rust inhibitors protect metal parts after application • Also available as a concentrate
$17.99
Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Avid BB5
$25.00
Pro Semi-Metallic pads feature a lightweight aluminum backing plate attached to the same quiet and high-performance compound found on Jagwire's Sport Semi-Metallic series disc pads. Weight is reduced by nearly 50%. These pads are perfect for cross-country applications.
$29.99
- Forged alloy body and cage - Chromoly spindle - Toe clip compatible - 391g pair - 9/16-inch spindle
$37.99 - $44.99
With the Ultra Scooter 402 from ABUS, you can protect your motorbike or scooter with one of the safest types of lock available: a U-lock. The round handle is made of 11mm specially hardened steel and is double-locked in the lock body. The modern design of the Ultra Scooter 402 fits well in your hand and makes it easy to use. The lock body and the locking mechanism behind it impress with the same quality steel as the shackle itself. The Ultra Scooter 402 also has a lot to offer against more subtle theft methods, such as picking attempts, thanks to its high-quality locking cylinder. - 11mm, hardened steel round shackle - Double-locking mechanism securing the shackle in the lock body - The shackle, the body, and the load-bearing parts of the locking mechanism are manufactured using specially hardened steel - Special, modern design of the lock body casing allows for optimum handling - High-quality locking cylinder for protection against manipulation, e.g., picking - Four keys included with the lock
$45.95
Designed for bicycles with press-fit headsets, the WCS Press Fit Upper Headset features full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease and corrosion-resistant Ti-coated bearings. - Top cap: 7.3 or 12.4mm - Material: Alloy - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Sealed cartridge, Ti-coated - Weight: 43g (7.3mm), 49g (12.4mm)
$52.00 - $140.00
KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links
$69.99 - $90.00
-5 mm bars with a core of light steel and synthetic coating to prevent damage to the bicycle‘s paintwork -The bars and the lock body are made of particularly light materials and ferrous alloy -Bars are linked with special rivets -Premium automatic cylinder -The Bordo Lite Mini fits perfectly into jersey pocket
$72.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$85.00
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R
$100.00
- Unique link shape allows the chain to be narrower and lighter while increasing strength and providing more tolerance between cogs. - Flattop technology enables a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts - HollowPin construction for increased strength and efficiency
$109.95
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
$199.99
A HELMET MADE FOR THE CITY STREETS The Pedelec 2.0 is an uncompromising combination of protection and comfort. Complemented by clever features, it is the ideal companion in road traffic. In big city traffic, a helmet is an indispensable companion for you as a cyclist. Accidents happen quickly and if you fall, a bicycle helmet protects you against serious injury. With the Pedelec 2.0, ABUS offers a bicycle helmet that meets the high safety requirements of the big city. Its deep temple area provides the required additional protection. The Pedelec 2.0 is also characterised by the integrated rain hood, which can be quickly pulled over the helmet at the first sign of rain. The especially bright, rechargeable light and the replaceable visor offer additional, passive protection. - This NTA 8776 helmet is a helmet that complies with the requirements in the Dutch Technical Agreement (NTA) 8776. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - High visibility due to powerful reflectors - Large, highly mounted and integrated LED tail light with 180° visibility - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 9 air outlets connected with flow channels - Ponytail compatibility: Helmet well suited to plait wearers - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Size adjustment by means of a half ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and form fitting - Foamed-in fly nets - Lower edge protection: Provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Rain cover integrated in the helmet
Page 1 of 1