The Hollywood T975 is a 15mm thru-axle bike mount that bolts to any solid surface. Simply loosen your quick release lever and remove the axle from the front wheel. Place the bike's fork dropouts onto the 975 bike mount and slide the axle back through both the fork dropouts and the 975 bike mount. Tighten and secure.
$34.99 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Saris' Bike Beam connects to your bike's seatpost and stem to simulate a standard top tube. It allows you to carry bicycles including full-suspension, women's, and children's bikes, and those with oversize tubing on your trunk or hitch-mounted carrier.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris' Thelma Juvenile Retro Fit Kit allows your Saris Thelma hitch rack (sold separately) to carry kids' bikes with 20-inch wheels. The semi-circular tray holds the bike's front wheel, which is secured by a ratcheting strap. Because nothing touches the bicycle frame, the paint finish stays safe. Also, the wheel tray folds down when not in use, turning the rack into a convenient, low-profile package.
Saris’ Sentinel 3-Bike rack is ready to go right out of the box, easy to mount, and, thanks to its narrow arm spread, securely holds three bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the six hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Saris’ Bike Porter Trunk 2-Bike rack is outfitted with adjustable features to fit a vast variety of vehicles. Constructed of sturdy, durable steel, the rack’s frame has 15 different easy-to-adjust positions. It’s held in place by foam-padded legs and four straps, each with a smartly coated hook to protect your car’s finish. The bikes are held down with ratcheting, anti-sway straps and rest in protective, grooved rubber cradles, which allow the shift cables to slot down underneath and away from the top tube.
Don’t waste your weekend! Go explore with Saris’ Bike Porter Trunk 3-Bike rack. It’s outfitted with adjustable features to fit a vast variety of vehicles. Constructed of sturdy, durable steel, the rack’s frame has 15 different easy-to-adjust positions. It’s held in place by foam-padded legs and four straps, each with a smartly coated hook to protect your car’s finish. The bikes are held down with ratcheting, anti-sway straps and rest in protective, grooved rubber cradles, which allow the shift cables to slot down underneath and away from the top tube.
What has 3 legs and the power to set you free? Saris' Bones 2-bike trunk rack. It's affordable, easy to use and just plain cool. Plus, it easily adjusts to fit most vehicles including hatchbacks and mini-vans. The non-marring, thermoplastic rubber foot pads adjust to the contours of your vehicle for stability. The Bones carries up to 2 bikes easily and accommodates a wide variety of frame styles. It's made from 100% recyclable materials making a super-tough rustproof rack. It folds for easy storage, too!
$179.99 - $184.99
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
Yakima's Control Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory track systems). The Control Towers attach to your factory track system with Yakima's vehicle-specific landing pads and they have die-cast components for a sturdy hold.
The Saris Axis securely cradles your bikes so you can shuttle them around with ease. At only 16 pounds, this lightweight hitch rack is easy to install or remove and it tilts to provide access to the rear of your vehicle. The durable frame securely hauls 3 bikes of up to 35 pounds each and fits both standard hitch sizes. And, Saris's ratcheting anti–sway straps secure and stabilize your bikes while protecting their finish.
You'll be free to transport any two bikes, no matter what size with the Saris Freedom Hitch Rack! Its innovative design adjusts to fit almost any bike: road, mountain, cruiser, kids; if it's got two wheels, the Freedom adjusts quickly and easily to haul it. It uses quick-adjust trays and ratcheting straps that hug and secure your bike, so the Freedom is super simple to load and it holds any two bikes up to 35 pounds each. And, the support folds down when not in use turning the rack into a convenient, low-profile package.
For around-town jaunts and cross-country excursions, Hollywood's Road Runner 3 Extended is great for carrying three bikes. The extended 13-inch distance from the face of the hitch to the back of the rack allows it to fit around an external spare tire. Hollywood's rubber separators with integrated straps and a lower tie-down bar hold the bikes fast and ensure they won't bump each other. Even when loaded, this rack easily tilts out of the way for rear access, and it folds down when not in use. Plus, Hollywood's No-Wobble system eliminates slack between the hitch and rack for extra stability. The Road Runner 3 also includes a keyed-alike locking hitch pin and 8-foot locking cable for total security and convenience. • Weight: 33 lbs • Max weight capacity: 35 lbs per bike • 13 inches from face of hitch to the back of the rack • Not to be used on any trailer, fifth wheel, or towed vehicle
Transport all types of bikes with Saris’ Freedom 2-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright support even tilts down to allow trunk access. Plus, the rack itself only weighs 21 pounds, making it easy to take on and off.
Secure your bikes with Saris' Kool Rack 2-Bike. Hydraulic pressure holds the rack in place while valve limits protect your truck bed walls. Its pivoting rubber pads grip most surfaces, including bedliners. No drilling is required. The Kool Rack comes with two fork mounts—additional mounts can be added (sold separately). Besides holding bikes, the Kool Rack can be used to secure cargo from sliding around the pick-up bed.
Hitch rack users rejoice! The Thelma 2-Bike Hitch Rack is here! Using innovative semi-circular trays and ratcheting straps that hug and secure your wheels, the Thelma is super simple to load and it holds almost every bicycle type from slick-tired road machines to big, knobby-clad mountain bikes (up to 35 pounds each). Plus, it does so without ever touching the frame, so your paint job is safe. And, the wheel trays fold down when not in use turning the rack into a convenient, low-profile package.
Saris’ Bones RS 3-Bike rack might as well be welded to your car—it’s that rock solid. Easy to mount and dismount, the rack has two stainless steel belts that are tightened by leveraged ratchet systems. Plus, two lower leg hooks and six grippy rubber feet mean you can set it and forget it. Ratcheting anti-sway straps keep your bikes in place, the arms fold down to keep out of the way, and a locking mechanism secures the rack to your vehicle for peace of mind.
Freedom is a versatile lightweight rack that makes loading and unloading bikes quick and easy. Foldable upright arms securely clamp top or seat tubes with soft, non-marring pads. - Ratcheting straps keep bike stable and secure and adjust to fit most bikes - Standard wheel scoop fits up to 2.25" tires. Fat wheel trays are available separately - Adjustable to work with most bikes - Fits 1 1/4- and 2-inch hitches - Can hold two bikes weighing up to 60 lbs each - Rack weighs 20 lbs - Made in the USA
You’re cruising down the road with your collection of bikes and make a pit stop to top off the tank. While at the gas station you want to grab a snack from the back cooler and let Rover out for a well…you know. You walk around to the back of your vehicle and realize that you need to unload all these bikes to get access to the hatch. Sorry, Rover. You’re out of luck. Now what if we told you there was a better way? An easier way. A hitch bike rack that lets you access the rear of the car in one step – both with bikes and without. Born in Saris' innovative labs in Madison, Wisconsin, the Glide EX does exactly this thanks to one-step glide action. Simply push the trigger to release the rack, and boom – hatch access. When you’re done, the same amount of (non) effort glides the hitch rack upright. Then you’re good to go, and Rover is too. Featuring easy-to-load bike hold downs, best-in-class ratchet straps and integrated locks, you can speedily fasten your bikes to the Glide EX and know they’re secure as you head toward your next adventure. - Convenient, one-step access to the back of the car - fully loaded with bikes or not. - Innovative four-bar linkage system controls the center of mass, creating a smooth, glide-action away from the vehicle. - Hanging hitch bike rack transports as many as 4 bikes, up to 35 lb. per bike. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Style points: your choice of standard black, head-turning bronze and sapphire blue. - Hanging hitch style bike rack - Carries 4 bikes, up to 35 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - Innovative four-bar linkage system: centers bike mass for smooth, glide-action away from vehicle. - No assembly needed - Rack weight: 37 lb - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Built and tested to outlive the elements.
Page 1 of 1