Lighting

Recon-E Light to Bosch motor unit connector cable.

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

Recon-E Light to Shimano motor unit connector cable.

The Stick-On Mount adheres to any flat and mildly contoured surface to provide a bar mount for your Light & Motion lighting system (sold separately). Works great for full-face helmets, paddleboards, kayaks, etc.

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

3 LED tail light The Blinky 3 is a classic cycling safety light. The iconic and durable kidney bean design has been keeping bikers visible for two decades. The 3 LEDs are super efficient and last for over 100 hours on flash mode.

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.

Topeak's WhiteLite Race's two super-bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 140 hours of use! Plus, the WhiteLite Race features a super-simple no-tools rubber strap handlebar mount that works on any bike. Just push the lens to toggle the light's modes!

Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Vmax+ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more! For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. - 6 Modes with Run Times: 4:30-25:30h - Lumen Output: 150 - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in last mode used)

Features: - 30 lumens (Numen+ Tag TL) ANSI standard approved - Runtime: Steady (5hrs), Low Steady (10hrs), Pulse (15hrs), Flash (30hrs), Random (50hrs) - Li-Po rechargeable battery - Power indicator - Auto start sensor - IPX4 Waterproof rating - Integrated USB plug - Flexible mounting system works with different shape handlebars and seatposts

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

A daylight-visible tail light with 35 Lumens of balanced light to keep you visible in the city, day or night. Paint the city day or night The Flare R City tail light is daytime visible and designed for the city. A wide beam spread, focused optics, and an interruptive flash pattern make it visible from over 400m during the day. A built in ambient light sensor provides auto-brightness control, and the included Quick Connect bracket offers simple removal for recharging via the included USB cable. 35 Lumens of power and the wide visibility angle of the Flare R City tail light make you the biggest distraction on the city streets, day or night. - 35 Lumens provide visibility from over 400m day or night - Wide visibility angle intended for city use - Two day-time visibility modes and two night modes - Day flash 35LM-8hrs, night flash 35LM-16hrs, day steady 20LM-3hrs, night steady 2LM-20hrs - Integrated light sensor for auto-brightness control - Battery save mode at 5% life helps ensure a safe ride home with depleted battery - Quick connect bracket with 16 degree offset compensates for seatpost angle - Includes Quick connect bracket and micro USB charging cable

Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.

Features: - Up to 20 lumens ANSI standard approved - Runtime: Day mode 4 hrs., High 8 hrs., Middle 15 hrs., Flash 30 hrs. - Li-Po rechargeable battery - Low power indicator - Motion sensor include - IPX4 waterproof rating - Charge via Micro USB cable

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

Light & Motion's DC To AC Car Adapter converts the current from your car's outlet so it can be used by your light charger. Keep it handy in your vehicle so your light is always charged and ready to go by the time you get to the trailhead!

The Recon HL600 is the perfect multi-function light for use on handlebars or helmets. It features abundant light output in a lightweight design. - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount

ILLUMINATING THE FUTURE The Recon+ tail light can switch to a lower intensity light that avoids blinding fellow riders on the group ride. Features: - One super-powerful LEDs from world-famous manufacturer OSRAM - Two steady beam modes, three flash beam modes and - Group Ride beam mode with different level lumen output for variable use and run time - Pairs to activate Group Ride beam mode that switches to a lower intensity to avoid blinding fellow riders on the group ride - Compatible with ANT+ and Bluetooth devices - Easy-to-read LED power indicator on side displays the current power or recharge status (70~100% - Green; 30~70% - Orange; 0~30% - Red) - USB-C charging port - Rated IPX7 waterproof

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

A bright front light with Kindbeam, designed to keep light on the path ahead and out of oncoming riders' eyes. - Commuter Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Color-temperature balanced beam with a clean cutoff pattern for confident night riding - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Long-lasting brightness exceeds FL1 industry standards and outlasts the competition - Runtimes: high 450LM — 1.5hrs, low 200LM — 6hrs, day flash 300 LM — 12hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - Quick Connect+ offers secure installation with a flexible mount that's compatible with all bars 22.2 to 35mm - Includes Ion Comp R light, Adjustable Quick Connect+ Mount, and micro USB charging cable

Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. SWIFT™ 500 FRONT LIGHT FEATURES? - Lumen Output: 500 - 5 Modes with Run Times: 1:40 – 32:00h - Charge Time: 1:45h at greater than 500mA | 3:00h at 500mA - Water / Dust Resistant IP64 Rated - Micro USB Rechargeable SWIFT™ 500 RUN TIMES* - Low - 10:00h at 150 Lumens - Med - 3:40h at 250 Lumens - High - 1:40h at 500 Lumens - Flash - 12:30h at 500 Lumens - Walk - 32:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 4:30-25:30h - Charge Time: 2:00h - Weight: 59g - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in last mode used) Vmax+™ 150 RUN TIMES* - Fast Flash - 11:30h - Slow Flash - 9:30h - Disco Flash - 9:45h - Pulse Flash - 6:00h - High Steady - 4:30h - Low Steady - 25:30h *Run times are approximations and may vary