Other

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

The Problem Solvers Cross Hanger is the perfect front brake cable hanger for your cyclocross bike with cantilever brakes. Designed for easy installation and maximum braking power, this light, durable aluminum piece is a small but crucial part of your cantilever setup.

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.

The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs.

MSW Seatpost Clamps keep your saddle and seatpost from moving around while you’re out riding. Tough and dependable, they’re available in polished silver or black finishes, as well as four common sizes. - MSW Seatpost Clamp - 34.9mm, Black

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

- Compatible with Shimano HG40/50/70/90 chains - KMC Z50, Z7, Z8, X8.93, X8.99 chains - Reusable - No Tool Required - Pin Length: 7.3 mm

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

- Replacement pins for tool shed chain tool. - Bag of 10

- Color coordination, all the cool kids are doing it - Replacement lock rings for Giant Swage and Tactal Grips - 2 rings per package

- Replacement V-brake pads - Wear limit mark - Ultra-light 6061-t6 forged pad holder - Compatible with Shimano, SRAM, TRP, and all major brands of V-brakes

- Dust-proof and waterproof rubber seal cover. - Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.

-Seatpost clamp for Defy/Avail Advanced models (2015-2016)

-Seatpost clamp for Defy/Avail models (2009-2016)

-Seatpost clamp for TCR ADV/ADV SL models (2009-2016)

Seatpost lever and cable set for Giant's Contact Switch Seatpost

- Face plate spacer for Conduct brake. - Longer bolts included.

Giant Contact S Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provide you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction. Features - 22.2mm carbon aerobar extensions - Compatible with 45203-04 Clip-on Aerobar clamp

Giant Contact Ski Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provide you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction. Features - 22.2mm carbon aerobar extensions - Compatible with 45203-04 Clip-on Aerobar clamp

- OD2 aero carbon Headset spacer kit for Contact SLR for Aero Integrated Handlebar

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

- Accessory base plate to mount EnergyPak Plus on the bike. - EnergyPak Plus accessory comes with a water bottle cage adaptor plate that can be mounted to the base plate when the EnergyPak Plus is not in use.

Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

Giant's Connect SL U-Bend Carbon Aerobar Extension is for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the U-Bend. Thanks to carbon construction, this is a featherweight and super-stiff bar. Plus, it has 70mm of fore/aft adjustment to dial in your ideal aero position.

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible